Roboticbell™ Ultimate V2025 User Manual

 

Roboticbell™ Ultimate User Manual

Version RBU2025



Welcome to Roboticbell™

Thank you for choosing Roboticbell™, the world’s first automatic cloud-programmable IoT bell ringing system by V-ROBOTICS. This user manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance. Please read this manual carefully before use and keep it handy for future reference.

1. Safety Instructions

  • Ensure the device is placed on a stable, flat surface away from water or extreme heat.
  • Do not attempt to open the device casing—contact V-ROBOTICS support for repairs.
  • Use only the provided power adapter to avoid damage.
  • Keep the device out of reach of children when not in use.

2. Device Overview

Roboticbell™ is an IoT-enabled bell ringing system designed for schools, factories, and other institutions. The front panel includes the following controls:

  • SB (Single Bell) Button: Triggers a single bell ring.
  • DB (Double Bell) Button: Triggers two consecutive bell rings.
  • LB (Long Bell) Button: Triggers an extended bell ring.
  • FN (Function) Button: Accesses advanced settings and modes.
  • Volume Control Knob: Adjusts the volume of the internal 3W speaker.
  • LCD Screen: Displays time, IP address, and schedule information.
  • Power Switch: Located on the side—turns the device on/off.



3. Getting Started

Unboxing and Setup

  1. Remove Roboticbell™ from the packaging and place it in the desired location.
  2. Connect the power adapter to the device and plug it into a wall outlet.
  3. Switch on the power. The LCD will display the current time and status.
  4. Adjust the Volume Control Knob to set the initial speaker volume.

Initial Configuration

  • The device comes with default Wi-Fi credentials: SSID: parrot and Password: password.
  • Follow the steps in to connect and update these settings.

4. Manual Operation

Use the manual bell ringing buttons for immediate action:

  • Press SB: Activates a single short bell ring.
  • Press DB: Activates two quick bell rings.
  • Press LB: Activates a prolonged bell ring.

5. Advanced Settings

Changing Schedule Mode

  • Steps:
    1. Press and hold the FN button for more than 5 seconds.
    2. This will toggle schedule to next
    3. Repeat until desired schedule get selected

Manual Schedule Ringing

  • Steps:
    1. On the app, view the list of scheduled events.
    2. Click on the desired schedule to trigger it manually.

7. Troubleshooting

IssueSolution
Device won’t power onCheck the power adapter connection and outlet. Contact support if unresolved.
No sound from bellsEnsure volume settings are adjusted via the app or settings page.
Schedules not syncingConfirm internet connection and try the Sync button again.


8. Contact Support

V-ROBOTICS
Software Technology Park
New Industrial Development Area
Kanjikode, Palakkad, Kerala 678621
Phone: +91-9074507122
Email: mail@vrobotics.in
Website: www.vrobotics.in





Comments

Post a Comment